Mistifyer 56 ANTI-DRIP SYSTEM™

100061 (230V P/N 100063)

Now available with new 56 nozzle (.006) system. With super Fine Nozzles, you can make fog go further with finer particles without using more water. Only uses 1 gallon (3.8 l) per minute, yet evaporates with no dripping. Add a DMX controller for easy programming. Officially accepted as the healthiest fog or haze on the market today!

Components included with each order:

1 Pump - 1 gallon per minute at 800 psi (55 bars), with 2 solenoids (quiet) with wheels
1 Filter with seperate connecting tubing and hose attachement
56 Fine Nozzles with anti-drip & push-connector fitting (.008)
35" x 26" (89cm x 66cm) Straight High-Pressure Black Tubing (attached to nozzles)
1 50' (15.25m) Roll of Black Tubing (thick wall, high pressure nylon 3/8" OD (.95cm)
1 Tubing Cutter
4 End Plugs (fits into push-connector)
3 90° Elbows
3, 3-Way Connectors (for manifolds)
1, 4-Way Connector
1 Low-Pressure Drain Hose Tubing

Click here for Mistifyer 56 Anti-Drip System™ Specs and Instructions

Here are some Tips & Tricks for using the the Mistifyer System.

Watch a narrated action video clip of the Mistifyer (1.1 MB Windows Media)

Universal DMX Relay (Accessory)

250041 (230V P/N 250042)

Can be used with all systems, except Mistifyer Sr.

Roadcase (Accessory)

250222

List of parts. This Mistifyer OP Instruction Booklet is for the 56, 35, and 25 nozzle units only as a link from the posted support page.

Details of the Mistifyer.

Additional items to operate:

In order to operate the machine, you will need the following items:

Water pressure supply with a standard 20mm hose connection that attaches to the filter unit.
If your water supply is a long distance, you will need additional water hose connection.
If the hose is new, you should rinse the hose for 2 hrs with water so the smell of new hose does not effect the water going into the pump. Then your mist smells so fresh and clean, it makes singers want the mist for each performance.
The required water pressure must be 2.75 bars minimum, then the pump increases the pressure to 55 bars with a small amount of water.
Your water consumption will only be 3.8 liters per minute. For this large of an area to have full misting, it is very conservative on fluid consumption.
Each of the nozzles comes to you connected to the .6 m length tubing, making assembly of the entire length of nozzles, very quick and easy.
This systems includes all of the items on the list with 56 nozzles, 56 connectors and 56 lengths of the tubing, as well as additional tubing, the filter and your plug-in connector.

If you would like to give us more details of your plans of using the product, we can help in the design faze and give you other pointers.

Thank you for choosing CITC Special Effects equipment.